Strand 35mm Metal Pole Joiner

This 35mm joiner is designed to connect two 35mm metal poles, allowing you to create longer lengths. To use the joiner, insert it halfway into the end of one pole, then slide the other pole onto the joiner, ensuring that only a hairline joint is visible. You can conceal this joint with a supporting centre bracket.

If you are cutting a pole down yourself, avoid using the cut ends in the centre with the joiner, as the cut may not be clean enough to achieve a proper hairline joint. Make sure to place cuts and end of the pole and cover them with your chosen finials. 

When joining poles, always place a bracket underneath the joint for added support.

Joiner Length: 120mm

Joiner Diameter: 32mm